Features

Export-oriented and designated accessories for aerospace and military industries

Diameter range: DN01~80

Pressure rating: 16kgf/cm2

Valve position form: normally closed

Body Material: Cast Steel WCB (Code: C) - -Only DN25~80

SS304 Stainless Steel (Code: B), SS316 Stainless Steel (Code: R)

Applicable medium: gas, liquid, steam, oil, etc. Kinematic viscosity of applicable medium: ≤50CSt (mm2/s)

Suitable ambient temperature: -15~75°C

Sealing material: lb type—NBR (TMjing rubber, code: N)

Lie type-EPDM (EPDM, code: E)

Type IIIc—VITON (Fluoroelastomer, code: V)

Va type-PTFE (fluoroplastic, code: P)

The DN01~08 direct-acting structure can be installed at any angle, and the horizontal installation of the coil vertically upward can prolong the service life.

DN10~80 step-by-step direct-acting structure must be installed horizontally

Leakage: Ib, II e> IIIc type: 0ml/min; Va type: normal temperature medium---1.5ml/min, steam---0.1ml/min, imprecise value

Regular voltage: AC220/AC230/AC240V 50/60Hz, DC24V, allowable fluctuation ±10%, other voltage customization

Electrical Interface: Conventional - Standard Junction Box Type

Explosion-proof - conventional lead type (standard length 1.5m, electrical interface conventional G1/2″ male thread, other threads can also be customized), special junction box type

Note: The color wire is the ground wire, and the rest are the power wire

Can be equipped with explosion-proof type, explosion-proof mark ExdIICT5 Gb (Certificate number: SYExl8. 0960X)